Leviton 6As10-3R 6A 3Ft Red Patch Cord

Red 3-Foot Cat 6A Ethernet Patch Cord by Leviton

The 6AS10-3R from Leviton is a 3-foot red Category 6A patch cord designed to connect network devices, patch panels, and switches. It is suitable for structured cabling in equipment racks and wall plate connections. Key features include a stranded 26 AWG conductor and a strain relief boot.

Key Features and Benefits of This Patch Cord

The stranded 26 AWG conductor is flexible, which makes short jumpers easier to route in tight racks. The strain relief boot protects the plug end from bending stress. The red jacket makes it simple to tell this link apart from other cables, for example on a priority or uplink connection.

Where to Use the 6AS10-3R Patch Cord

This patch cord suits patch panel to switch connections in telecom closets, data rooms, and office networks that use Category 6A cabling. At 3 feet, it works best for short runs between nearby equipment. It is a patch cord, not an in-wall or permanent installation cable.

Installation and Compatibility Checks

The cord is wired to the T568B standard, so confirm this matches the wiring scheme of your panels and jacks. Its 0.24-inch diameter should be checked against dense patch panels. Verify that your equipment and cabling are Category 6A if you want to keep full Category 6A performance.

Additional Buying Context

The page lists UL approval for Canada and the US. Warranty terms are not given for this item. If you need a different length, check other lengths in the same series, and keep patch cords short to keep cabinet cable management tidy.