Leviton ARC60PD162 Gray Pin and Sleeve Plug With Drawplate

Switch-Rated ArcArrest Pin and Sleeve Plug by Leviton

The ARC60PD162 from Leviton is a 60-amp, 208-volt switch-rated pin and sleeve plug with drawplate from the ArcArrest series, designed to connect and disconnect industrial equipment. It is suitable for high-pressure washdown areas. Key features include NEMA 4X and IP67/IP69K ratings and a lockout hole.

Key Features and Benefits of This Pin and Sleeve Plug

Because it is switch-rated, the plug works as a local disconnect and, according to Leviton, de-energizes equipment without exposing live components or arc flash under load. The lockout hole supports lockout/tagout procedures. A V-0 flammability rating and operation from minus 20 to 60 degrees Celsius suit demanding plants.

Where to Use the ARC60PD162 Pin and Sleeve Plug

This plug is intended for industrial equipment that needs a local means of disconnect, which Leviton ties to NEC and OSHA requirements. Its IP67/IP69K sealing suits washdown settings. It is not a general-purpose household plug, and compatible mating devices are not listed on the page.

Installation and Compatibility Checks

Verify that the receptacle or inlet matches the 60A, 208V, 2P+G configuration. Terminals accept 8 AWG to 4 AWG conductors, and the cord grip range is 0.750 to 1.125 inches. The plug measures about 3.52 by 8.03 by 4.63 inches. Installation should be done by a qualified electrician.

Additional Buying Context

A 1-year limited manufacturer warranty applies, and the product page offers a specification sheet and an installation sheet worth reviewing first. The plug is rated UL 1682 and CSA 22.2 182.1-17. Pair it with a compatible ArcArrest inlet or receptacle, which is purchased separately.