Satco S11526R1 4W CA11 LED Bulb

Dimmable 4W CA11 LED Candelabra Bulb by Satco

The S11526R1 from Satco is a 4-watt CA11 LED bulb designed for decorative fixtures with an E12 candelabra base. It is suitable for wet locations. Key features include 350 lumens of warm 2700K light, dimmable operation, and a 15,000-hour average rated life.

Key Features and Benefits of This LED Bulb

At 4 watts, this bulb draws far less power than a traditional candelabra lamp, which helps reduce energy costs. The 2700K color temperature gives a warm, familiar glow. A 360-degree beam angle spreads light in all directions, and the 15,000-hour rated life reduces replacements.

Where to Use the S11526R1 LED Bulb

This bulb is well suited for chandeliers, wall sconces, and other decorative fixtures that use an E12 base. Its wet-location safety rating also allows use in fixtures exposed to moisture, provided the fixture itself is rated for it. Output is modest at 350 lumens, so it suits accent and ambient light.

Installation and Compatibility Checks

Confirm that your fixture has an E12 candelabra socket and enough room for the 4.49 inch length and 1.38 inch diameter. The bulb is dimmable, so use a dimmer rated for LED loads. Voltage is not listed, so check the specification sheet. Operating temperature runs from -4°F to 113°F.

Additional Buying Context

The bulb carries FCC and RoHS listings and a 2-year manufacturer warranty. If you need a brighter or cooler result, look for a higher-lumen or higher-CCT (correlated color temperature) option. Always verify the fixture's maximum wattage and base type before swapping out an older lamp.